West 207-SA Special Clear Hardener 10.6 Fluid ounces C207-SA
West System 207-SA Special Clear Hardenerā¢ was developed for coating and fibreglass cloth application where an exceptionally clear, moisture-resistant, natural wood, or a clear carbon fibre finish is desired.
West 207 Hardener will not blush or turn cloudy in humid conditions.
Thin film applications roll out and tip off smoothly, requiring less sanding in preparation for finish coatings.
Professional and first-time builders like 207 because it is reliable and easy to use.
Three coats or more can be applied in one day without additional surface preparation. Fewer coats are required to fill fibreglass weave and in most cases, the final coating can be sanded the following day.
Boats can be built faster.
Builders also appreciate the excellent fibreglass wet-out characteristics achieved with the 105/207 combination, yet it won't drain from vertical surfaces like the very slow curing, low-viscosity epoxies.
West System 105/207 has strong physical properties, so it can be used as a structural adhesive for gluing and laminating. It has excellent compatibility with paints and varnishes.
An ultraviolet inhibitor in 207-SA helps provide a beautiful, long-lasting finish when used with quality UV filtering varnish.
A West 105/207 combination cures clear and colourless.
Pairs with the 105A size of Resin
Mix Ratio, Resin: Hardener 3 parts resin: 1 part hardener
Pot life at 72Ā°F (22Ā°C): 20 to 26 minutes
Cure to a solid-state: 10 to 15 hours
Cure to maximum strength: 4 to 7 days
Minimum recommended temperature: 60Ā°F (16Ā°C)
Pumps: West 300
